SPECIFICATIONS

 

Certification: CE,EMC,RoHS

Hign-concerned Chemical: None

Material: Stainless Steel

Model Number: PL-Y1

Origin: Mainland China

Power (W): 420w

Use: Household Pre-Filtration

Water treatment machine Type: Water Purifier

 

.

.

.

Portable, high oxygen concentration, small size, low noise, no consumables, more efficient, longer service life.

.

.

.

.

.

.

.

.

.

Operation method:

Set the timer, connect the power cord, turn on the main switch, adjust the flow meter, and then this oxygen machine can produce a high concentration of oxygen, the output oxygen concentration is about 95%.

.

Built-in condenser and oil-water separator, condenser can reduce the temperature of the air source, the oil-water separator will separate the water in the air source and automatically discharge the water, which will effectively extend the use of oxygen machine.

.

.

Y1 high concentration oxygen machine:

Product model: PL-Y1.

Timer: cycle timer / microcomputer timer. (cycle timer is simpler, microcomputer timer is more professional)

AC multi-function display: it can display voltage, current, power, power consumption, frequency, power factor.

Cooling fan: 15050 15cm AC cooling fan. (pure copper wire core, ball bearing)

Ground wire: the 15cm cooling fan and the shell are connected with a ground wire to avoid inductive electricity on the shell, in accordance with European standards.

White metal baking paint shell: 1mm thickened metal shell + white baking paint shell, more solid, more beautiful, anti-fingerprint, wear-resistant.

Oxygen output: it can be connected to a 4*6mm PU tube. (304 stainless steel quick joint, outer diameter 6mm)

Socket: built-in additional 1pc 10A fuse.

Screws and nuts: 304 stainless steel.

LOGO: if you need us to print your LOGO, please contact us.

.

Ambient temperature: -10~45℃

Optimal ambient temperature: 1-20℃

Environmental humidity: ≤85%RH

.

Brand: Pinus longaeva (we can print your logo and paste it on the ozone machine)

Service life / Warranty: more than 15000 hours / 2 years.

Characteristic: portable, high oxygen concentration, small size, low noise, no consumables, more efficient, longer service life.

Customized: can be customized.

.

Product application:

Oxygenation, ozone generator, aquaculture, fish ponds, chemical industry, factory, agriculture, laboratory, hotel, KTV, bar, etc.

.

Packing list: 1pc oxygen machine, 1pc 1.8m pure copper power cord, 2m 4*6mm PU tube and 1pc air stone.

.

Oxygen generation module:

Intake requirements: dry, oil-free

Intake pressure: 170kpa-250kpa

Intake flow rate: 40-45L/min (140kpa) (3L/min oxygen generator)

Intake flow rate: 65-70L/min (180kpa) (5L/min oxygen generator)

Molecular sieve: new type oxygen sieve - lithium low silicon (imported 0.5mm)

Ambient temperature: ≤40 degrees Celsius

Ambient humidity: ≤85%RH

Mechanical impurity of compressed air in: <20mg/m3

.

Oil free air compressor: (3L/min)

Power: ≤230w

Air flow rate: 58L/min (0kpa)

Air flow rate: 48L/min (140kpa)

Air flow rate: 42L/min (200kpa)

Maximum air source pressure: 250kpa

Speed: ≥1400 rpm

Capacitance: 6uF

Size: 190*110*149mm

Weight: ≤3.9kg

.

Oil free air compressor: (5L/min)

Power: ≤380w

Air flow rate: 96L/min (0kpa)

Air flow rate: 75L/min (200kpa)

Air pressure: 250kpa

Speed: ≥1400 rpm

Capacitance: 10uF

Size: 221*98*167mm

Weight: ≤6.5kg

.

Condenser: reduce the temperature of the air source.

.

Oil water separator: separates moisture from the air, with automatic drainage function.

.

Alumina ball dryer:

It can further reduce the humidity of the air source and effectively extend the service life of the oxygen generation module.

We recommend that you take out the alumina ball and dry it or replace it after 3 months of use.

.

Product picture: (the picture below is: cycle timer 5L/min)

.

.

.

.

.

.

.

.

.

.

..

.

.

.

.

.

.

.

.

.

.